Frequently Asked Questions

If the barcode printer skips labels, consider the following steps:
1.VeriFinancial Year printer settings in the control panel; ensure they match the label size.
2.Check and adjust label configuration in BUSY to match the actual label size; consider reducing the label size if possible.
3.Ensure the label paper roll is inserted correctly.
4.Calibrate the printer according to its model and configuration to resolve the skipping issue.

To fix the runtime error when saving a purchase voucher in BUSY, you can try re-indexing the software. This can help resolve any issues with the vouchers. Additionally, make sure that you have entered all the necessary details correctly and that there are no duplicate entries. If the error persists, it is recommended to contact the customer support team for further assistance.

If you want to increase the size of barcode then please follow the given 
steps
Step 1: Go to add on menu 
Step 2: Then select item barcode printing option 
Step 3: Then click on configure bar code labels then select format
 and click on configure format.
Step 4: Then look for label height and label width options and adjust as
 per your requirements.

Sorry, you cannot use the barcode for adding or creating items. However, it can be helpful for modifying items by allowing you to easily pick already saved item master in the list. In BUSY, the barcode is primarily used for searching and identifying the items, not for creating new item masters.
For more clarification please call to BUSY Help Centre at 8282828282,

If you have a UPI barcode scanning issue, you need to check the below reasons:
Step 1: You need to check the barcode UPI configuration.
Step 2: You must check the actual UPI barcode scan, not the different
Step 3: You must check the UPI link for which you are configured in the barcode setting.
Step 4: You must scan with a QR code scanner.

If you are unable to scan barcode then check the barcode scanner in excel does it 
scanning properly or not if scanning well then go to voucher series configuration and 
select the voucher type and series then click on voucher configuration and check 
the POS configuration is enabled or not if not enabled then configure POS for 
smooth barcode scanning

Pls Follow the Below Steps For Printing Item Barcode :
Step 1: Add on
Step 2: Item Barcode printing 
Step 3: Configure Barcode Lables ( Make sure you have created the Barcode Type Format - Item Only)
Step 4: Print Barcode from Item Master
Step 5: Select the Format and Item Info for printing.
Note : Barcode Characters should be between 5-20 Characters.

barcode not set properly in sticker then follow these steps 
1. go to the Add on menu
2. open item barcode printing
3. then click on configure barcode labels 
4. select barcode labels 
5. then click on configure format 
6. after that click on configure format 
7. then check all configurations related barcode is proper or not then save it.

Barcode not printing correctly because several factors. some of the factors you can check
1. Configure the barcode design with the correct label size
2. Ensure that the barcode test print is successful
3. Insert the barcode label following the instructions in the manual
4. Adjust the left, right, top, and bottom paper settings
5. Follow the printer calibration settings

If you want to print barcode for remaining stock of an item, then you need to follow these steps:
Step 1: Open your company then go to Add on menu.
Step 2: Select item barcode printing option then click on print barcode from current stock status.
Step 3: Select the item, format, date then ok to proceed.