Frequently Asked Questions

To resize qr code you need to use the following condition in QR code field 
hastag first inventory comma then type QRC collon and size of QR then close 
inventory comma then comma and field position for left L for right R and for 
centre C

Pls Follow the Below Steps For Printing Item Lables and Barcode :
Step 1: Add on
Step 2: Item Barcode printing ( We can print Barcode from Multiple Options)
Step 3: Item Account Label Printing ( We can Print Lables).
Note : Barcode Characters should be between 5-20 Characters.

If you don't have a barcode scanner or it gets damaged, you can still enable the barcode feature in BUSY. You can manually enter the barcode number for each item in the software and it will work the same way as scanning the barcode.

To Configure old barcode follow these steps:
Step 1: Go to Add On.
Step 2: Click on Item barcode printing.
Step 3: Select Configure bar codes labels.
Step 4: Click Configure Formate.
Step 5: Go to Configure Label Define according to your requirement name mrp and barcode and save. 

If you want to print barcode from BUSY, you need to first configure a barcode format. To design a barcode format you can contact to your authorized channel partner or contact us on our support helpline number.
Note: Barcode designing is a chargeable service.

If barcode skip blank sticker then there could be multiple reason 
1 It could be possible at the time of printing you are using skip lines option 
2 It could be possible the design you are selecting for print is not configured properly

You can adjust the alignment and size of the barcode and MRP fields in BUSY by customizing the barcode design in the Addon menu and targeting the body section of the invoice to increase the character size for the MRP field.

If barcode is not printing in second row, you can check these points:
1. Make sure while printing barcode, No of lines to skip should be 0.
2. Check from barcode configuration no. of lables in one row should be more than 1.

If the barcode number exist in that stock journal entry in that case you are unable to scan the barcode so make sure you have not deleted the entry that contains that barcode number that you want to scan

If barcode is cutting from right side then you need to check the height and width of barcode by going to Add on and then Item Barcode Printing. Further you can concern with them who configure it for you.